{
    "ok": true,
    "data": {
        "title": "52PI-RPI-B+-IRON-BOX(English)",
        "rev_id": 646,
        "updated_at": "2015-07-20T02:17:38+00:00",
        "chunk_count": 6,
        "chunks": [
            {
                "title": "52PI-RPI-B+-IRON-BOX(English)",
                "rev_id": 646,
                "heading_path": "",
                "chunk_index": 0,
                "content": "# 52PI-RPI-B+-IRON-BOX(English)",
                "char_count": 31,
                "token_estimate": 8
            },
            {
                "title": "52PI-RPI-B+-IRON-BOX(English)",
                "rev_id": 646,
                "heading_path": "Description",
                "chunk_index": 1,
                "content": "This delicate iron box is specially design for raspberry Pi B+,the iron box can protect the Raspberry Pi be damaged from finger touching or drop down with this tiny protect box ,you can keep your lovely Raspberry Pi safety <img src=\"iron_01.jpg\" title=\"iron_01.jpg\" width=\"600\" alt=\"iron_01.jpg\" \/>",
                "char_count": 298,
                "token_estimate": 75
            },
            {
                "title": "52PI-RPI-B+-IRON-BOX(English)",
                "rev_id": 646,
                "heading_path": "Overview",
                "chunk_index": 2,
                "content": "<img src=\"iron_02.jpg\" title=\"iron_02.jpg\" width=\"330\" alt=\"iron_02.jpg\" \/><img src=\"p13.JPG\" title=\"p13.JPG\" width=\"330\" alt=\"p13.JPG\" \/><img src=\"p15.JPG\" title=\"p15.JPG\" width=\"330\" alt=\"p15.JPG\" \/>\n\nmounted on Raspberry Pi\n\n<img src=\"p5.JPG\" title=\"p5.JPG\" width=\"330\" alt=\"p5.JPG\" \/><img src=\"p4.JPG\" title=\"p4.JPG\" width=\"330\" alt=\"p4.JPG\" \/><img src=\"p2.JPG\" title=\"p2.JPG\" width=\"330\" alt=\"p2.JPG\" \/>\n\nin the night\n\n<img src=\"p12.JPG\" title=\"p12.JPG\" width=\"330\" alt=\"p12.JPG\" \/><img src=\"p10.JPG\" title=\"p10.JPG\" width=\"320\" alt=\"p10.JPG\" \/><img src=\"p11.JPG\" title=\"p11.JPG\" width=\"310\" alt=\"p11.JPG\" \/>",
                "char_count": 613,
                "token_estimate": 154
            },
            {
                "title": "52PI-RPI-B+-IRON-BOX(English)",
                "rev_id": 646,
                "heading_path": "product scale",
                "chunk_index": 3,
                "content": "<img src=\"0.91oled_dimention2.png\" title=\"0.91oled_dimention2.png\" width=\"1000\" alt=\"0.91oled_dimention2.png\" \/>",
                "char_count": 112,
                "token_estimate": 28
            },
            {
                "title": "52PI-RPI-B+-IRON-BOX(English)",
                "rev_id": 646,
                "heading_path": "schematic",
                "chunk_index": 4,
                "content": "<img src=\"Pic2.png\" title=\"Pic2.png\" width=\"1000\" alt=\"Pic2.png\" \/>",
                "char_count": 67,
                "token_estimate": 17
            },
            {
                "title": "52PI-RPI-B+-IRON-BOX(English)",
                "rev_id": 646,
                "heading_path": "Mounting Instruction",
                "chunk_index": 5,
                "content": "-   If it's the first time for you to use Raspberry Pi, please make sure the I2C interface is enabled. This page will show you how to enable the I2C interface. <http:\/\/www.52pi.net\/forum.php?mod=viewthread&tid=1363&highlight=rtc>\n\n<!-- -->\n\n-   Download OLED's[ssd1306 driver](#tech1 \"wikilink\"),If you are done download the device driver,extract them copy and past to \/home\/Pi folder\n\n<!-- -->\n\n-   Type `sudo apt-get install build-essential git-core libi2c-dev i2c-tools lm-sensors` to install necessary component\n\n![](Test1.png \"Test1.png\")\n\n-   If the steps above are done,next type`sudo vim.tiny \/etc\/modules`to modify modules file just like the following\n\n<!-- -->\n\n    i2c-bcm2708\n    i2c-dev\n\n![](Test3.png \"Test3.png\")\n\n![](Test4.png \"Test4.png\")\n\n-   sudo make安装驱动程序\n\n![](Test5.png \"Test5.png\")\n\n-   安装成功后打开example文件夹 输入make指令编译示例程序，编译成功后发现，当前文件夹下已成功生成可执行文件ssd1306_demo\n\n![](Test6.png \"Test6.png\")\n\n-   输入sudo .\/ssd1306_demo执行可以看到0.91'OLED模块已经成功点亮\n\n![](Test7.png \"Test7.png\")\n<img src=\"Test9.JPG\" title=\"Test9.JPG\" width=\"900\" alt=\"Test9.JPG\" \/>",
                "char_count": 1055,
                "token_estimate": 345
            }
        ]
    }
}