{ "ok": true, "data": { "title": "EP-0238", "rev_id": 15925, "updated_at": "2025-07-10T07:13:59+00:00", "chunk_count": 15, "chunks": [ { "title": "EP-0238", "rev_id": 15925, "heading_path": "", "chunk_index": 0, "content": "# EP-0238", "char_count": 9, "token_estimate": 3 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "52Pi PoE+ HAT for RPi 3B+\/4B\/5", "chunk_index": 1, "content": "
\n\"EP-0238-01-01.jpg\"\n
EP-0238-01-01.jpg<\/figcaption>\n<\/figure>", "char_count": 174, "token_estimate": 44 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Description", "chunk_index": 2, "content": "PoE+ Hat for Raspberry Pi 3B+, 4B, and Raspberry Pi 5 The PoE+ Hat is a versatile accessory designed to enhance the functionality of Raspberry Pi 3B+, 4B, and Raspberry Pi 5 by providing power over Ethernet (PoE+) capabilities. This allows for a more convenient setup where the Raspberry Pi can be powered directly through the Ethernet port using a PoE switch or PoE power supply. The hat is equipped with a 5.1V\/4.5A output, ensuring sufficient power for the Raspberry Pi and any additional peripherals.\nNOTE: Do not connect power supply to USB-C port on Raspberry Pi when you are using PoE+ hat, it may damage your device !!!", "char_count": 627, "token_estimate": 157 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Features", "chunk_index": 3, "content": "- Compatibility<\/strong>: Designed to fit Raspberry Pi 3B+, 4B, and Raspberry Pi 5 models, offering a high level of compatibility with a wide range of Raspberry Pi boards that support PoE+.\n- Power Supply<\/strong>: The PoE+ Hat supports a 5.1V\/4.5A output. For full power operation, it requires a switch that supports the 802.3at protocol and can provide at least 30W of power.\n- Heat Dissipation<\/strong>: The PoE+ Hat has been designed with efficiency in mind, resulting in lower temperatures compared to other PoE+ modules. The thermal imaging shows a temperature difference of nearly 30 degrees Celsius under the same load conditions.\n- GPIO Extension<\/strong>: The kit includes 2x20Pin PC104 female headers to extend the GPIO pins, allowing for additional peripherals and sensors to be connected to the Raspberry Pi.\n- PoE+ Power Supply<\/strong>: It also provides 2x2Pin PC104 female headers specifically for powering the PoE+ interface, ensuring a stable power supply for the PoE+ Hat and the Raspberry Pi.", "char_count": 1062, "token_estimate": 266 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Features", "chunk_index": 4, "content": "- Adjustable Design<\/strong>: The PoE+ Hat features an adjustable design that supports different Raspberry Pi models, making it a flexible choice for various projects and setups.", "char_count": 188, "token_estimate": 47 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Features", "chunk_index": 5, "content": "This PoE+ Hat is an excellent addition for anyone looking to simplify the power management of their Raspberry Pi projects and take advantage of the benefits of PoE+ technology.", "char_count": 176, "token_estimate": 44 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Specifications > Power Requirements", "chunk_index": 6, "content": "- Output Voltage: 5.1V\n- Output Current: 4.5A\n- Required Switch Power: At least 30W for full power operation\n- PoE+ Standard: 802.3at (for full power operation)", "char_count": 168, "token_estimate": 42 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Specifications > Compatibility", "chunk_index": 7, "content": "- Supported Models: Raspberry Pi 3B+, 4B, and Raspberry Pi 5\n- GPIO Extension: 2x20Pin PC104 female headers", "char_count": 111, "token_estimate": 28 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Specifications > Design and Construction", "chunk_index": 8, "content": "- Adjustable Fit: Accommodates different Raspberry Pi models\n- Heat Dissipation: Efficient design for lower operating temperatures\n- PoE+ Interface Power: 2x2Pin PC104 female headers for PoE+ interface power supply", "char_count": 220, "token_estimate": 55 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Specifications > Additional Features", "chunk_index": 9, "content": "- Ease of Installation: Designed for simple setup and integration\n- Temperature Performance: Lower temperature operation compared to other PoE+ modules\n- Universal Compatibility: Suitable for almost all PoE+ enabled Raspberry Pi motherboards", "char_count": 247, "token_estimate": 62 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Gallery", "chunk_index": 10, "content": "- Product outlook\n\n\"EP-0238-01-01.jpg\"\n\n- On back of product\n\n\"EP-0238-01-02.jpg\"\n\n- Compatibility\n\n\"EP-0238-01-03.jpg\"\n\\* Cooling Effect \"EP-0238-11.jpg\"\n\n- Compatiable with Raspberry Pi 3B+\/4B\/5\n\n\"EP-0238-03.jpg\"\n\n- Specification details\n\n\"EP-0238-06.jpg\"\n\"EP-0238-09.jpg\"\n\n- Product dimension\n\n\"EP-0238-05.jpg\"\n\\* Port definitions \"EP-0238-07.jpg\"\n\n- Application scenario\n\n\"EP-0238-10.jpg\"", "char_count": 1104, "token_estimate": 276 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "How to assmeble it ?", "chunk_index": 11, "content": "- Please assemble it according to following figure:\n\n\"EP-0238-02.jpg\"\n\\* Final effect \"EP-0238-08.jpg\"", "char_count": 240, "token_estimate": 60 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Package Includes", "chunk_index": 12, "content": "\"EP-0238-04.jpg\"", "char_count": 84, "token_estimate": 21 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "How to use it?", "chunk_index": 13, "content": "- Step 1. Assemble it according to the figure in section \\`how to assemble it\\`.\n- Step 2. Flash the latest Raspberry Pi OS to microSD card and insert into card slot.\n- Step 3. Connect the MicroHDMI cable to Raspberry Pi.\n- Step 4. Connect the PoE switch to Raspberry Pi Ethernet cable. (PoE switch should support 30w and support 802.3at protocol.", "char_count": 355, "token_estimate": 89 }, { "title": "EP-0238", "rev_id": 15925, "heading_path": "Keywords", "chunk_index": 14, "content": "- PoE hat for Raspberry Pi 3B+, PoE+ hat for Raspberry Pi 4B, PoE+ hat for Raspberry Pi 5", "char_count": 91, "token_estimate": 23 } ] } }