{
    "ok": true,
    "data": {
        "title": "ER-0007",
        "rev_id": 12987,
        "updated_at": "2023-04-18T07:06:24+00:00",
        "chunk_count": 7,
        "chunks": [
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "",
                "chunk_index": 0,
                "content": "# ER-0007\n\n-   Purchase URL \\[ <https:\/\/52pi.com\/products\/raspberry-pi-3-model-b-1gb-ram-quad-core-wifi-bluetooth-3b-board> \\]",
                "char_count": 126,
                "token_estimate": 32
            },
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "Description",
                "chunk_index": 1,
                "content": "The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.\nCompared to the Raspberry Pi 2 it has:\n\\*A 1.2GHz 64-bit quad-core ARMv8 CPU\n\n-   802.11n Wireless LAN\n-   Bluetooth 4.1\n-   Bluetooth Low Energy (BLE)\n\nLike the Pi 2, it also has:\n\n-   1GB RAM\n-   4 USB ports\n-   40 GPIO pins\n-   Full HDMI port\n-   Ethernet port\n-   Combined 3.5mm audio jack and composite video\n-   Camera interface (CSI)\n-   Display interface (DSI)\n-   Micro SD card slot (now push-pull rather than push-push)\n-   VideoCore IV 3D graphics core\n-   The Raspberry Pi 3 has an identical form factor to the previous Pi 2 (and Pi 1 Model B+) and has complete compatibility with Raspberry Pi 1 and 2.\n\nWe recommend the Raspberry Pi 3 Model B for use in schools, or for any general use.\nThose wishing to embed their Pi in a project may prefer the Pi Zero or Model A+, which are more useful for embedded projects, and projects which require very low power.\n\n------------------------------------------------------------------------",
                "char_count": 1056,
                "token_estimate": 264
            },
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "Gallery",
                "chunk_index": 2,
                "content": "<img src=\"Raspberry-Pi-3-top-down-web.jpg\" title=\"Raspberry-Pi-3-top-down-web.jpg\" width=\"500\" alt=\"Raspberry-Pi-3-top-down-web.jpg\" \/>\n----",
                "char_count": 140,
                "token_estimate": 35
            },
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "Hardware Guide",
                "chunk_index": 3,
                "content": "-   \\[Hardware Guide \\| <https:\/\/www.raspberrypi.org\/learning\/hardware-guide\/> \\]\n-   \\[Software Guide \\| <https:\/\/www.raspberrypi.org\/learning\/software-guide\/> \\]\n-   \\[Addons Guide \\|<https:\/\/www.raspberrypi.org\/learning\/addons-guide\/> \\]\n-   \\[Troubleshooting Guide \\| <https:\/\/www.raspberrypi.org\/learning\/troubleshooting-guide\/> \\]\n-   \\[Parents Guide \\| <https:\/\/www.raspberrypi.org\/learning\/parents-guide\/> \\]\n-   \\[Teachers Guide \\| <https:\/\/www.raspberrypi.org\/learning\/teachers-guide\/> \\]\n\n------------------------------------------------------------------------",
                "char_count": 572,
                "token_estimate": 143
            },
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "WHAT YOU WILL NEED",
                "chunk_index": 4,
                "content": "ESSENTIAL (FOR GENERAL USE)\n\n-   SD Card\n-   We recommend an 16GB class 10 SD card, ideally preinstalled with NOOBS.\n-   Display and connectivity cable\n-   Any HDMI\/DVI monitor and any TV should work as a display for the Pi. For best results, use one with HDMI input, but other connections are available for older devices.\n-   Keyboard and mouse\n-   Any standard USB keyboard and mouse will work with your Raspberry Pi.\n-   Wireless keyboards and mice will work if already paired.\n-   For keyboard layout configuration options see raspi-config.\n-   Power supply\n-   The Pi is powered by a USB Micro power supply (like most standard mobile phone chargers).\n-   You'll need a good-quality power supply that can supply at least 2A at 5V for the Model 3B, or 700mA at 5V for the earlier, lower powered models.\n-   Low current (\\~700mA) power supplies will work for basic usage, but are likely to cause the Pi to reboot if it draws too much power.\n\nOPTIONAL",
                "char_count": 952,
                "token_estimate": 238
            },
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "WHAT YOU WILL NEED",
                "chunk_index": 5,
                "content": "-   Ethernet (network) cable \\[Model B\/B+\/2\/3 only\\]\n-   An Ethernet cable is used to connect your Pi to a local network and the internet.\n-   USB wireless dongle\n-   Alternatively, you can connect to a wireless network using a USB wireless dongle, which will require configuration.\n-   Audio lead\n-   Audio can be played through speakers or headphones using a standard 3.5mm jack.\n-   Without an HDMI cable, an audio lead is necessary to produce sound.\n-   No separate audio lead is necessary if you're using an HDMI cable to connect to a monitor with speakers, as audio can be played directly through the display; but it is possible to connect one if you prefer to have \\*the audio played through other speakers - this requires configuration.\n-   Heatsinks and enclosure.\n-   Cooling Fan\n\n------------------------------------------------------------------------",
                "char_count": 863,
                "token_estimate": 216
            },
            {
                "title": "ER-0007",
                "rev_id": 12987,
                "heading_path": "FAQ",
                "chunk_index": 6,
                "content": "-   Raspberry Pi FAQ: \\[ FAQ \\| <https:\/\/www.raspberrypi.org\/documentation\/faqs\/> \\]",
                "char_count": 84,
                "token_estimate": 21
            }
        ]
    }
}