EP-0111
ICE Tower Cooling Fan Black
- Purchase URL [ https://52pi.com/products/52pi-ice-tower-cpu-cooling-fan-v2-0-for-raspberry-pi-black ]
Description
This ICE Tower Cooling Fan black is burned for solving heat dissipation problem too! Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. Best of all, this super cooling fan support both Raspberry Pi 3B+ and the new Raspberry Pi 4B. The fan has 7 different color LEDs that change automatically, making your fan more beautiful and personalized.
Features
- DC 5V Power in (Can be powered by the Raspberry Pi)
- Ice Tower Structure
- 5mm copper tube
- Super heat dissipation
- Rated power 0.4W @5V, 0.08A
- Super Cool fan background light (7 Colors)
- Easy to setup
- Compatible with Raspberry Pi 3B+/4B
- Plug and play
Dimensions
- The Dimensions is the same as ICE Tower CPU Cooling Fan.
 |
Gallery
Raspberry Pi 4B
- It can be compatible with several acrylic case.
- Colorful case, Black & White, All black case.
 |
Raspberry Pi 3B+
 |
How to assemble
- Front view
\* Back view 
===Raspberry Pi 3B+===
- 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
- 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
- 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
- 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
Raspberry Pi 4B
- 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
- 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
- 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
- 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
Package Include
- 1 x Ice Tower radiator and Fan
- 2 x Steel Mounting brackets
- 8 x M2.5x6 Copper sticks
- 4 x M2.5 Nuts
- 6 x M2.5x4 screws
- 3 x Thermal Tape
- 1 x Screw Driver
- 1 x Protective Acrylic Panel
PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.
FAQ
- Q: Can it be install to my retroflag case?
A: No, the dimension is too big.
- Q: How many degrees can be decreased ?
A: We've tested it at room temperature 25℃, it can decreased about 40℃.
- Q: Does it easy to assemble?
A: Yes, it is very easy to install, we've provided an instruction for you.