EP-0120

Dual Fan Hat for RPi

Description

The controllable LED switch and fan switch provided by the dual fan hat board can be adjusted when needed, when the light is not needed, the LED light can be turned off, when the fan is not needed, the fan, fan and LED light can be turned off Can be adjusted independently.

Features

Easy to assemble
LED independent control
Independent fan control
Pull out the GPIO pin

Mechanical Drawing

Gallery


![ left \| 320px](Dualfanhat1.jpg " left	320px")	![ none \| 320px](Dualfanhat2.jpg " none

Specifications


![ left \| 320px](Bana9.jpg " left	320px")	![ none \| 320px](Bana10.jpg " none

Application Scenario


![ left \| 320px](Bana11.jpg " left	320px")	![ none \| 320px](Bana12.jpg " none

How to use

Directly connect the hat board to the GPIO pin of the Raspberry Pi as shown in the figure, and the power supply mode is powered by the Raspberry Pi GPIO pin (5V).

==Package Includes==

1 x Dual Fan Hat for RPi
1 x Copper Pad Heat Sink
2 x Black Aluminum Heat Sink
4 x Silver Aluminum Heat Sink
4 x M2.5 Screw
4 x M2.5 Nut
4 x M2.5 Copper Pillar

Keywords

Dual Fan Hat, Raspberry Pi 4B, heat sink module, switch fan control