Home / EZ-0082
View Raw Markdown rev:13152 · 2023-05-18T07:59:29+00:00

EZ-0082

X825 V2.0

X825_V2.0-2.jpg

Description

X825 V2.0 is Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Storage Expansion Board. You can make your own cloud storage or private NAS storage system at your home. The X825 expansion board provides a complete storage solution for newest raspberry pi 4B. It supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 V2.0 Board. Upgraded to USB3.1 Gen1 port.

 X825 V2.0 is only fit for Raspberry Pi 4 Model B!

Features

  • Easy to assemble
  • PogoPin Power Supply
  • OS compatiable: All Raspberry Pi operating systems
  • USB3.1 Gen1 Port
  • Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.)
  • Ideal storage solution for Raspberry Pi 4 Model B
  • On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
  • Powers the Raspberry Pi via Pi's 40-pin header
  • LED red indicator indicates powered status and blue indicator indicates drive status
  • USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
  • Quick file transfer with high-speed USB 3.1 connectivity from a PC or a Mac
  • Powers the Raspberry Pi - no additional power supply for RPi 4

Power Supply Requirement

  • Power supply: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output
  • DC Power Plug Size : 5.5*2.5mm
  • Important Note: Please use high quality DC 5V 4A power supply.

low quality power supply may probably damage your 2.5 inch HDD/SSD.

Gallery

  • 2.5 inch SATA HDD/SSD Storage Expansion Board
X825_V2.0-2.jpg
| [none \|320px](File:X825_V2.0背面.jpg "wikilink") |
EZ-0082.jpg
|
  • Port Definitions

left|800px * Dimension X825_V2.0尺寸.jpg ===Assembling Steps===

  • Easy assemble

left | 800px

Package Include

  • 1 x X825 V1.2 Expansion Board
  • 1 x USB 3.1 connector
  • 1 x Mounting screw package
  • 4 x Copper pillar pack

Note: Not include the raspberry pi and the 2.5" SATA SSD. X825_V2.0清单.jpg

Keywords

  • X825, raspberry pi 4B, HDD, SSD, USB3.1, 2.5 inch ,SATA HDD/SSD Storage Expansion Board

FAQ

  • Q: Don't detect HDD/SDD?

 A: Please try to reboot your Pi first, and then make sure everything is connect well, and please make sure the power supply is working properly.     open a terminal and typing this command: sudo fdisk -l  and then paste the result to our salesmen, they will follow up this case.

  • Q: Do i need an external power source supplying for x820 board?

 A:Yes, here is the specification: 5V and 4A with a 5.5mm barrel connector.

  • Q: With a hard drive installed, could you eleminate the need for a micro sd card and boot straight from drive?

 A:The Pi4 official has not said it supported, theoretically the hardware is supported, you can try According to :   [ http://www.raspberrypiwiki.com/index.php/X820#How_to_boot_from_a_USB_Mass_storage_device_on_a_raspberry_pi_3 ]