X4000K SKU:EZ-0055

For Use With

Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B

Operating System

Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
OSMC - Supports X4000 HDMI audio
Openelec - Supports X4000 HDMI audio
Raspbian Jessie - Supports X4000 HDMI audio
Rune audio - Supports X4000 HDMI audio
Pi Core Player - To be tested

Key Features

High-quality ESS DAC for best sound quality
Use the ESS Technology flagship DAC chipset (ES9018K2M)
127dB DNR -120dB THD+N
It can playback upto 384khz I2S/DSD256 with Raspberry Pi 3 (Over HDMI, Moode Player)
Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP
Used the ultralow phase noise 100MHz HiFi TCXO
Used the Texas Instruments ultra-low-noise voltage regulator
Gold-plated RCA connectors
Supports up to 1TB 2.5-inch SATA hard drives
Selectable HDMI audio or Raspberry Pi i2S audio
Supports SPDIF Optical Digital Audio
Supports HDMI high-bit-rate (HBR) audio
High quality video performance
3.5mm analog stereo jack output
Allows you to split the audio stream from a HDMI signal
No HDMI output connection is required to receive audio at the analog and optical outputs
Connects directly to the Raspberry Pi - no additional cables needed
Can be used individually with only 3 wire I2S signal connected from other i2s interface
Ultra-compact chassis
Powers the Raspberry Pi - no additional power supply
Lighted power switch
Raspberry Pi status LEDs still visible
Easy to change the Raspberry Pi OS SD card - No need to open the case
Easy DIY with Raspberry Pi

Specification

Parameters	Values
Power supply:	+5Vdc +/-5%
Input Ports:	1 x HDMI, Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
Output Ports:	1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical
Analog audio output level:	2V RMS
Resolution/Sampling Rate:	upto 32bit / 384KHz (ES9018K2M)， upto 24bit / 192KHz (Raspberry Pi I2S)， upto 24bit / 192KHz (Optical S/PDIF Audio)
Optical Audio Format:	LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
Size：	122mm x 90mm x 90mm

Power Supply Unit

AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
With 2 snap-in plugs for North America (US) and Europe (EU)
DC Power Plug Size : 5.5*2.5mm

Notes

For use with original power supply unit only
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)

Packing List

X4000 Metal Case x 1
X4000 Expansion Board x 1
X800K HDD Expansion Board x 1
Power Adapter 5V 4A x 1
Metal case Accessories kit x 1
Tool kit x 1

Gallery